No products in the cart.
DALY BMS 12S 36V Lithium ion 50A Common Port Battery protection module
10 in stock
$21.85
10 in stock
[ti_wishlists_addtowishlist]Compare
DALY BMS LI-ION 12S 36V 50A common port battery protection module(not for LIFEPO4 cells) WITH 13 wire sense cable with connector
Description
DALY 12S 36V Lithium ion 50A Common Port Battery protection module.
DALY 12S Li-ion 50A
Introduction about this BMS:
This is a 12S fixed configuration basically it cannot be used for any other battery pack configurations. Because it is only a Lithium-ion battery management system only. As a result, that they cannot be used for LiFePo4 and Li-Metal or LTO batteries .It is strictly for only Li-Ion battery packs only.
Over charge and over discharge protection:
The Li-ion battery pack will stop charge after the cell voltage reaches 4.25V and stop discharge when its voltage reaches 3V.
Temperature Protection:
- In high temperatures the bms ranges from 70℃ discharging battery protection.
- Meanwhile in low temperatures the bms ranges up to -20℃ battery protection.
Short circuit protection:
When there is a defect or damage to the circuit at same time the bms will shut down the whole Battery.
Certifications Approved:
ISO/ FCC/ RoHS/ PSE and CE APPROVED
Applications:
Solar and RV, Electric bikes and Skateboard including camping boats and Power tools, Lawn moving and household energy storage systems etc.
What you will get:
- 12S Li-ion 50A rated voltage with 36V BMS.
- Balanced wire sense cable (13 Wire sense cable with connector)
- Instruction Manual
Conclusion:
Most important that it is only a waterproof bms available in lithium industry.
This BMS is also for all kinds of lithium-ion cells including 18650 ,21700,36500 cylindrical cells and prismatic cells.
| DESCRIPTION | SPECIFICATION |
|---|---|
| BATTERY TYPE | Li-ion |
| Continue discharge current | 50A |
| Peak current | 150A±25A |
| main circuit inner resistance | ≤ 20mΩ |
| Charge Voltage | S*4.25V |
| Charge Current | 25A |
| Over charge detect voltage | 4.25 ± 0.05V |
| Over charge protection delay | 1S |
| over charge release voltage | 4.15 ± 0.05V |
| Balance detect voltage | 4.18V |
| Balance release voltage | 4.18V |
| Balance current | 30± 5mA |
| Over discharge detect voltage | 2.7 ± 0.1V |
| Over discharge detect delay | 1 Sec |
| Over discharge release voltage | 3.0 ± 1.0V |
| Over current detect delay | 1 mS |
| Over current detect voltage | OFF LOAD |
| Short circuit protection condition | Short circuit external load |
| Short circuit detect delay | 250µS |
| Short circuit protection relay condition | Off load |
| Temp protection | Charge <-5 ͦ C or >50 ͦ C
discharge < 70 ͦ C |
| working current | 100µA |
| Sleeping current (when in discharge) | 20µA |
| Working temp range | -20 ̴ 70 ͦc |
| Sleeping temp range | -40 ̴ 80 ͦc |
| Weight | 5.5 Ounce |
| Size | 2.5*3.1*0.6 inches |
| Wiring Diagram | Daly wiring diagram |
Additional information
| Weight | 8.5 oz |
|---|---|
| Dimensions | 10 × 7 × 2 in |
| MPN | DALY12SLIION50A |
| Brand | DALY |
