No products in the cart.
DALY BMS 4S 12V LiFePo4 120A Common Port Battery protection module
4 in stock
$70.20
4 in stock
[ti_wishlists_addtowishlist]Compare
DALY BMS LiFePO4 4S 12V 120A common port battery protection module(not for li-ion/NMC cells) WITH 5 wire sense cable with connector
Description
DALY BMS 4S 12V 120A LiFePo4 with balance leads
DALY 4S LFP 120A
Introduction about this BMS:
This is a 4S fixed configuration basically it cannot be used for any other battery pack configurations. Because it is only a lithium iron phosphate battery management system only. As a result that they cannot be used for Li-Ion, Li-Metal or LTO batteries.It is strictly for LiFePo4 battery packs only.
Over charge and over discharge protection:
The LiFePo4 battery pack will stop charge after the single cell voltage reaches 3.7V and stop discharge when its voltage reaches 2.5V.
Temperature Protection:
In high temperatures the bms ranges from 70℃ discharging battery protection.
Meanwhile in low temperatures the bms ranges up to -20℃ battery protection.
Short circuit protection:
When there is a defect or damage to the circuit at same time the bms will shut down the whole Battery.
Certifications Approved:
ISO/ FCC/ RoHS/ PSE and CE APPROVED
Applications:
Solar and RV, Electric bikes and Skateboard including camping boats and Power tools, Lawn moving and household energy storage systems etc.
What you will get:
- 4S LiFePo4 120A rated voltage with 12V BMS
- Balanced wire sense cable (5 Wire sense cable with connector)
- Instruction Manual
Conclusion:
Most important that it is only a waterproof bms available in lithium industry.
This BMS is also for all kinds of lithium-ion cells including 18650 ,21700,36500 cylindrical cells and prismatic cells.
| DESCRIPTION | SPECIFICATION |
|---|---|
| BATTERY TYPE | LiFePo4 |
| Continue discharge current | 120A |
| Peak current | 360±60A |
| main circuit inner resistance | ≤ 20mΩ |
| Charge Voltage | S*3.75V |
| Charge Current | 60A |
| Over charge detect voltage | 3.75 ± 0.05V |
| Over charge protection delay | 1S |
| over charge release voltage | 3.65 ± 0.05V |
| Balance detect voltage | 3.5 V |
| Balance release voltage | 3.5 V |
| Balance current | 30 ± 5 mA |
| Over discharge detect voltage | 2.7 ± 0.1 V |
| Over discharge detect delay | 1S |
| Over discharge release voltage | 2.7 ± 0.1 V |
| Over current detect delay | 1mS |
| Over current detect voltage | Off load |
| Short circuit protection condition | Short circuit external load |
| Short circuit detect delay | 250µS |
| Short circuit protection relay condition | Off load |
| Temp protection | Charge <-5 ͦ C or >50 ͦ C
discharge < 70 ͦ C |
| working current | 100µA |
| Sleeping current (when in discharge) | 20µA |
| Working temp range | -20 ̴ 70 ͦc |
| Sleeping temp range | -40 ̴ 80 ͦc |
| Weight | 2 Pounds |
| Size | 8*4*0.8inches |
| Wiring Diagram | Daly wiring diagram |
https://bmsbatteries.com/product/daly-bms-4s-12v-lifepo4-120a-common-port-battery-protection-module/
Additional information
| Weight | 35 oz |
|---|---|
| Dimensions | 20 × 7 × 1 in |
