DALY BMS 8S 24V LiFePo4 100A Common Port Battery protection module
DALY BMS LiFePO4 8S 24V 100A common port battery protection module(not for li-ion/NMC cells) WITH 9 wire sense cable with connector
Description
DALY BMS 8S 24V 100A LiFePo4 with balance leads.
DALY 8S LFP 100A
Introduction about this BMS:
This is a 8S fixed configuration basically it cannot be used for any other battery pack configurations. Because it is only a lithium iron phosphate battery management system only. As a result that they cannot be used for Li-Ion, Li-Metal or LTO batteries.It is strictly for LiFePo4 battery packs only.
Over charge and over discharge protection:
The LiFePo4 battery pack will stop charge after the single cell voltage reaches 3.7V and stop discharge when its voltage reaches 2.5V.
Temperature Protection:
In high temperatures the bms ranges from 70℃ discharging battery protection.
Meanwhile in low temperatures the bms ranges up to -20℃ battery protection.
Short circuit protection:
When there is a defect or damage to the circuit at same time the bms will shut down the whole Battery.
Certifications Approved:
ISO/ FCC/ RoHS/ PSE and CE APPROVED
Applications:
Solar and RV, Electric bikes and Skateboard including camping boats and Power tools, Lawn moving and household energy storage systems etc.
What you will get:
- 8S LiFePo4 100A rated voltage with 24V BMS
- Balanced wire sense cable (9 Wire sense cable with connector)
- Instruction Manual
Conclusion:
Most important that it is only a waterproof bms available in lithium industry.
This BMS is also for all kinds of lithium-ion cells including 18650 ,21700,36500 cylindrical cells and prismatic cells.
DESCRIPTION | SPECIFICATION |
---|---|
BATTERY TYPE | LiFePo4 |
Continue discharge current | 100A |
Peak current | 300±50A |
main circuit inner resistance | ≤ 20mΩ |
Charge Voltage | S*3.75V |
Charge Current | 50A |
Over charge detect voltage | 3.75 ± 0.05V |
Over charge protection delay | 1S |
over charge release voltage | 3.65 ± 0.05V |
Balance detect voltage | 3.5 V |
Balance release voltage | 3.5 V |
Balance current | 30 ± 5 mA |
Over discharge detect voltage | 2.7 ± 0.1 V |
Over discharge detect delay | 1S |
Over discharge release voltage | 2.7 ± 0.1 V |
Over current detect delay | 1mS |
Over current detect voltage | Off load |
Short circuit protection condition | Short circuit external load |
Short circuit detect delay | 250µS |
Short circuit protection relay condition | Off load |
Temp protection | Charge <-5 ͦ C or >50 ͦ C
discharge < 70 ͦ C |
working current | 100µA |
Sleeping current (when in discharge) | 20µA |
Working temp range | -20 ̴ 70 ͦc |
Sleeping temp range | -40 ̴ 80 ͦc |
Weight | 1 pound |
Size | 6*2.5*0.8inches |
Wiring Diagram | Daly wiring diagram |
Example for Daly Bms Wiring Diagram:
https://dalybms.com/16s-bms-wiring-tutorial/
https://bmsbatteries.com/product/daly-bms-8s-24v-lifepo4-100a-common-port-battery-protection-module/
Additional information
Weight | 19 oz |
---|---|
Dimensions | 10 × 7 × 3 in |