Smart Jiabaida (JBD) 8S 24V 100A Li-Ion Common Port BMS with Bluetooth Integrated (default toLifepo4 cells) WITH 9 wire sense cable with connector, Thermostat
JBDBT 8S Li-Ion 100ABI
Introduction about this JBD BMS:
This bms is especially for 8S Bluetooth or smart fixed configurations only. Basically it can also be used for any other lithium technologies even if LiFePo4, Lithium Ion, LiPo and Lithium Metal by changing internal parameters after connecting to Bluetooth App or computer. Most important that it is strictly for 8S battery packs only. As a result, that they cannot be used for any other battery pack Configurations.
In the same way all Parameters can be changed Via Bluetooth App or UART USB Connection with PC Monitoring Program .Default setting inside BMS are for lithium-ion batteries.
Over charge and over discharge protection:
The Lithium-ion battery pack will stop charge after the cell voltage reaches 3.7V and stop discharge when its voltage reaches 2.5V.
Temperature Protection:
| DESCRIPTION | SPECIFICATION | |
|---|---|---|
| BATTERY TYPE | Li-ion cells(if preferred) | LiFePo4 cells(default) |
| Recharging current | 100A | |
| Discharging current | 100A | |
| Peak current | 300A for 5 Sec | |
| Charger voltage (CC-CV) | S*4.2V | S*3.6V |
| Charge Voltage | S*4.25V | S*3.75V |
| Over-charge protection voltage | 4.250V | 3.650V |
| Over-charge protection delay time | 1000mS | |
| Over-charge protection recovery voltage | 4.180V | 3.450V |
| Over-discharge protection voltage | 2.800V | 2.500V |
| Balance release voltage | 4.18V | 3.5V |
| Over-discharge protection delay time | 100mS | |
| Over-discharge protection recovery voltage | 2.900V | 3.000V |
| Over-discharge protection recovery condition | Disconnect load or Charging activation | |
| Discharge overcurrent protection current value | 360A | |
| Discharge overcurrent protection delay | 1000mS | |
| Discharge overcurrent protection recovery condition | Disconnect load or Charging activation | |
| Short circuit protection delay time | 200µS | |
| Short circuit protection recovery | Disconnect load | |
| Balanced turn-on voltage | 4.190V | 3.450V |
| Balanced current | 60mA | |
| Temperature protection value | 75 ͦ c | |
| Temperature protection release value | 53 ͦ c | |
| Discharge loop internal resistance | 20mΩ | |
| Self-consuming in operating mode | 20µA | |
| Working humidity in normal operating range | -20 – 70 ℃ | |
| Storage temperature when Humidity<90%, No condensation | -40 – 85 ℃ | |
| SIZE | 5.2*2.5*0.5 In | |
| WEIGHT | 16 Ounce | |
| JBD Wiring Diagram | JBD Wiring Diagram | |
| JBD User manual | JBD User Manual | |
JBD BMS WIRING DIAGRAMS:
https://jiabaida-bms.com/blogs/content/jiabaida-all-types-of-smart-bms-wiring-diagram
| Weight | 19 oz |
|---|---|
| Dimensions | 10 × 7 × 2 in |
| MPN | JBDBT8SLiIon100ABI |
| Brand | JIABAIDA |
DALY BMS 12S 36V LiFePo4 30A Common Port Battery protection module 
DALY BMS 3S 12V Lithium ion 60A Common Port Battery protection module 
DALY BMS 8S 24V LiFePo4 120A Common Port Battery protection module 