Description
JK BT 17S 60A
Note:
- Bluetooth function is integrated inside BMS. No separate Bluetooth dongle required.
- Small display, big display and UART-RS485 modules are also available in accessories section.
- This BMS supports LiFePo4 (LFP from 2.5V to 3.7V), Lithium ion (Li-Ion from 3V to 4.2V), Sodium Ion batteries (SIB from 1.5V to 4.0V) and Lithium titanate oxide (LTO from 1.5V to 2.8V).
Technical Index | Product model |
BD6Al7S6P | 8D6A20S6P |
Ternary lithium | 7-17 | 7-20 |
LiFeP04 | 8-17 | 8-20 |
Lithium Titanate | 13-17 | 13-20 |
Balance mode | Active equilibrium |
Equalizing current | 0.6A |
Main circuit conduction internal | l.3mΩ |
Continuous discharge current | 60A | 60A |
Maximum Discharge current | 100A | 100A |
Charging current | I0-60A | 10-60A |
Other interfaces (customized) | RS485/can display interface |
Entry cable | Same port |
Single voltage range | I-SY |
Voltage acquisition | ±5mV |
Overcharge Protection voltage | 1.2-4.35 V adjustable |
Over charge release voltage | 1.2-4.35 V adjustable |
Discharge Time of charging | 2~ 120S as adjustable |
Over discharge Protection voltage | 1.2-4.35 V adjustable |
Over discharge recovery voltage | 1.2-4.35 V adjustable |
Number of temperature | 3 ↑ |
Temperature protection | yes |
Short circuit protection | yes |
Coulomb meter | yes |
Bluetooth function | Support Android and IOS |
GPS remote (optional) | RS485/GPS |
Weight | 1 Pound |
Dimensions | 5.4*3.2*0.8 In |
Box Contains | - BMS
- Balance cable
- Temperature Probe (thermocouple)
- Starter Switch
|
JK BMS 17S 60A battery board management system smart lipo/lto/lifepo4 bms.
https://bmsbatteries.com/product/jk-bms-17s-60a-battery-board-management-system-smart-lipo-lto-lifepo4-bms-for-lithium-ion-battery-pack/